Todas as categorias
electrical power poles
90 Itens Encontrados
Pólo tratado da energia 35F eléctrica galvanizado para a linha de transmissão de Filipinas
Treated 35F Electric Power Pole Galvanized For Philippines Transmission Line Mechanical Property The metal supports are designed to withstand the nominal force F and the pressure of the wind V applied at 0.25m from the top. Under these loads, the safety factor with respect to the elastic limit of the steel is larger than 1.8. The post also resists a torque equal to (F+V) ×1m. Tests shows the load intervened when breaking is around 2 times of design load. Galvanization
25 FT de pó da altura que reveste a corrente eléctrica Pólo pela TA de Filipinas 30000/ano
25FT Height Powder Coating Electrical Power Pole For Philippines Specifications 1. small floor area & large bearing load 2. reasonable distribution of load carrying capability 3. steel electric pole Product information Steel tower type Tubular steel pole Voltage 220kV and below Material Q235,Q345,Q420 Welding CO2 protection welding or submerged arc auto methods Shape Generally round/polygonal face, and can be designed as the customers require. Surface laye Zink layer with hot
Força octogonal 355mpa de 11.8m 4000 Dan Electrical Power Pole Yiled
Polygonal 11.8m 4000 Dan Electrical Power Pole For Transmission Line Project Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers
Polar de potência elétrica com revestimento opcional em pó
Polygonal Shafts Electrical Power Pole with Optional Powder Coating Specifications Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base plate is square or round in
12m 14m 2 secções Pólo de energia elétrica ecológico para transmissão de energia sustentável e verde
12m 14m 2sections Eco-Friendly Electrical Power Pole for Sustainable and Green Power Transmission Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and
Poste de energia elétrica octogonal cônico de 10m com carga de projeto de 300~1000kg e revestimento de alta anticorrosão para transmissão de energia
Octagonal Conical 10m Electrical Power Pole For Power Transmission with High Anti-corrosion Coating The power pole of our company are made from quality sheets through bending, forming, automatic welding, hot dip galvanization and powder coating. We owned advanced production-line, it included Flatting machine, Steel plate shearer, bending machine, Auto-closed up machine, submerged arc welding machine and powder coating line, and our workmanship and quality control was achieved
Q345 seção poligonal exterior do material 30FT Electric Power Pólo 1
Outdoor Polygonal Q345 Material 30FT Electric Power Pole 1 Section Specifications: Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized color polyester power or
Classifique um Electric Power galvanizado 8M Pólo 2.75mm para a transmissão 110KV
Grade One 8M Galvanized Electric Power Pole 2.75mm for 110KV Transmission Description: Standard Accessory -Top plate -Base plate -Bottom strip -Standard hole -Climbing rung -Anchor bolt -Bitumen protection -Painted marking -Removable ladder Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with
o mergulho Q235 quente de 18m galvanizou o pólo da corrente eléctrica para a linha elétrica
18m Q235 hot dip galvanized electrical power pole for electric line Specifications 1.Material:ASTM A572,S355,Q235,Q345 or equivalent Internation standard 2.Voltage:10KV,110KV,132KV,220,500KV,or other 3.Serive Lifetime:>30 years 4.Type test and damage test: accepted 5.Welding method:CO2 welding or Submerged arc auto welding 6.OEM service: available The products made by us is high resisitivity against heat ,humidity ,moisture, water etc. Owning to use the rare earth special
